The Position class provides methods for setting the position in the special AOI merge mode which combines the lines of an AOI to a new image. For enabling/disabling the AOI merge mode see Vertical.
|
The IDS line scan ("AOI merge mode") is currently supported by the following models: •UI-300xSE •UI-304xCP Rev. 2/UI-304xSE/UI-504xCP Rev. 2/UI-504xFA/UI-504xSE Rev. 4 •UI-306xCP Rev. 2/UI-306xSE •UI-307xCP Rev. 2/UI-307xSE •UI-308xCP Rev. 2/UI-308xSE •UI-309xSE •UI-313xCP Rev. 2/UI-513xCP Rev. 2/UI-513xFA/UI-513xSE Rev. 4 •UI-314xCP Rev. 2/UI-514xCP Rev. 2/UI-514xFA/UI-514xSE Rev. 4 •UI-316xCP Rev. 2.1 •UI-318xCP Rev. 2.1 •UI-320xSE •UI-520xFA/UI-520xSE Rev. 4 (max. 7000 lines) •UI-324xCP Rev. 2/UI-324xLE/UI-324xML/UI-524xCP Rev. 2/UI-524xFA/UI-524xSE Rev. 4 •UI-325xCP Rev. 2/UI-325xLE/UI-325xML/UI-525xCP Rev. 2/UI-525xFA/UI-525xSE Rev. 4 •UI-326xCP Rev. 2/UI-326xSE/UI-526xCP Rev. 2/UI-526xFA/UI-526xSE Rev. 4 •UI-327xCP Rev. 2/UI-527xCP Rev. 2/UI-527xFA/UI-527xSE Rev. 4 •UI-328xCP Rev. 2/UI-328xSE/UI-528xCP Rev. 2/UI-528xFA/UI-528xSE Rev. 4 •UI-329xSE •UI-529xFA/UI-529xSE Rev. 4 (max. 7000 lines) •UI-336xCP Rev. 2 •UI-337xCP Rev. 2/UI-337xSE/UI-537xCP Rev. 2 •UI-386xCP Rev. 2/UI-386xSE/UI-586xCP Rev. 2/UI-586xFA/UI-586xSE Rev. 4 •UI-388xCP Rev. 2/UI-388xSE/UI-588xCP Rev. 2/UI-588xFA/UI-588xSE Rev. 4 •UI-524xCP/UI-524xSE (in freerun mode only) •UI-526xCP (in freerun or software trigger mode only) •UI-536xCP (in freerun or software trigger mode only) •UI-537xCP (in freerun or software trigger mode only) |
Methods
Method |
Description |
|---|---|
Returns the position of the two sensor lines. |
|
Returns the default value for the AOI merge position (default = 0, i.e. the two top lines). |
|
Returns the setting range for the AOI merge position. |
|
Sets the position of the two sensor lines. |
