Syntax
DeviceFeature_SetVerticalAOIMergeMode (INT nMode)
Description
Sets the AOI merge mode which combines the lines of an AOI to a new image.
|
The IDS line scan ("AOI merge mode") is currently supported by the following models: •UI-300xSE •UI-304xCP Rev. 2/UI-304xSE/UI-504xCP Rev. 2/UI-504xFA/UI-504xSE Rev. 4 •UI-306xCP Rev. 2/UI-306xSE •UI-307xCP Rev. 2/UI-307xSE •UI-308xCP Rev. 2/UI-308xSE •UI-309xSE •UI-313xCP Rev. 2/UI-513xCP Rev. 2/UI-513xFA/UI-513xSE Rev. 4 •UI-314xCP Rev. 2/UI-514xCP Rev. 2/UI-514xFA/UI-514xSE Rev. 4 •UI-316xCP Rev. 2.1 •UI-318xCP Rev. 2.1 •UI-320xSE •UI-520xFA/UI-520xSE Rev. 4 (max. 7000 lines) •UI-324xCP Rev. 2/UI-324xLE/UI-324xML/UI-524xCP Rev. 2/UI-524xFA/UI-524xSE Rev. 4 •UI-325xCP Rev. 2/UI-325xLE/UI-325xML/UI-525xCP Rev. 2/UI-525xFA/UI-525xSE Rev. 4 •UI-326xCP Rev. 2/UI-326xSE/UI-526xCP Rev. 2/UI-526xFA/UI-526xSE Rev. 4 •UI-327xCP Rev. 2/UI-527xCP Rev. 2/UI-527xFA/UI-527xSE Rev. 4 •UI-328xCP Rev. 2/UI-328xSE/UI-528xCP Rev. 2/UI-528xFA/UI-528xSE Rev. 4 •UI-329xSE •UI-529xFA/UI-529xSE Rev. 4 (max. 7000 lines) •UI-336xCP Rev. 2 •UI-337xCP Rev. 2/UI-337xSE/UI-537xCP Rev. 2 •UI-386xCP Rev. 2/UI-386xSE/UI-586xCP Rev. 2/UI-586xFA/UI-586xSE Rev. 4 •UI-388xCP Rev. 2/UI-388xSE/UI-588xCP Rev. 2/UI-588xFA/UI-588xSE Rev. 4 •UI-524xCP/UI-524xSE (in freerun mode only) •UI-526xCP (in freerun or software trigger mode only) •UI-536xCP (in freerun or software trigger mode only) •UI-537xCP (in freerun or software trigger mode only) |
Depending on the current AOI height each 2 double lines are combined into one image. X is half of the AOI height. In the default (full screen) is x = 512. The resulting image is 1024 pixels high, and thus re-fit the sensor size in full-screen.
•IS_VERTICAL_AOI_MERGE_MODE_OFF: Disables the AOI merge mode
•IS_VERTICAL_AOI_MERGE_MODE_ON: Enables the AOI merge mode
•IS_VERTICAL_AOI_MERGE_MODE_FREERUN: The sensor runs with maximum speed.
•IS_VERTICAL_AOI_MERGE_MODE_TRIGGERED_SOFTWARE: The sensor is triggered via software.
•IS_VERTICAL_AOI_MERGE_MODE_TRIGGERED_FALLING_GPIO1: The sensor is triggered on GPIO 1 (falling edge).
•IS_VERTICAL_AOI_MERGE_MODE_TRIGGERED_RISING_GPIO1: The sensor is triggered on GPIO 1 (rising edge).
•IS_VERTICAL_AOI_MERGE_MODE_TRIGGERED_FALLING_GPIO2: The sensor is triggered on GPIO 2 (falling edge).
•IS_VERTICAL_AOI_MERGE_MODE_TRIGGERED_RISING_GPIO2: The sensor is triggered on GPIO 2 (rising edge).
Parameter
•nMode: value to be set
Interface
Related functions
•DeviceFeature_GetVerticalAOIMergeMode
