IDS peak 2.15.0 / uEye+ firmware 3.54

Selects which bit of the user output register will be set by UserOutputValue.

Values description

•UserOutput0: Selects the bit 0 of the user output register.

•UserOutput1: Selects the bit 1 of the user output register.

•UserOutput2: Selects the bit 2 of the user output register.

•UserOutput3: Selects the bit 3 of the user output register.

Code example

C++

// Determine the current entry of UserOutputSelector
std::string value = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("UserOutputSelector")->CurrentEntry()->SymbolicValue();
// Get a list of all available entries of UserOutputSelector
auto allEntries = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("UserOutputSelector")->Entries();
std::vector<std::shared_ptr<peak::core::nodes::EnumerationEntryNode>> availableEntries;
for(const auto & entry : allEntries)
{
  if ((entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotAvailable)
          && (entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotImplemented))
  {
      availableEntries.emplace_back(entry);
  }
}
// Set UserOutputSelector to "UserOutput0"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("UserOutputSelector")->SetCurrentEntry("UserOutput0");

C#

// Determine the current entry of UserOutputSelector
string value = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("UserOutputSelector").CurrentEntry().SymbolicValue();
// Get a list of all available entries of UserOutputSelector
allEntries = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("UserOutputSelector").Entries();
List<string> availableEntries = new List<string>();
for(int i = 0; i < allEntries.Count(); ++i)
{
  if ((allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotAvailable)
          && (allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotImplemented))
  {
      availableEntries.Add(allEntries[i].SymbolicValue());
  }
}
// Set UserOutputSelector to "UserOutput0"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("UserOutputSelector").SetCurrentEntry("UserOutput0");

Python

# Determine the current entry of UserOutputSelector (str)
value = nodeMapRemoteDevice.FindNode("UserOutputSelector").CurrentEntry().SymbolicValue()
# Get a list of all available entries of UserOutputSelector
allEntries = nodeMapRemoteDevice.FindNode("UserOutputSelector").Entries()
availableEntries = []
for entry in allEntries:
  if (entry.AccessStatus() != ids_peak.NodeAccessStatus_NotAvailable
          and entry.AccessStatus() != ids_peak.NodeAccessStatus_NotImplemented):
      availableEntries.append(entry.SymbolicValue())
 
# Set UserOutputSelector to "UserOutput0" (str)
nodeMapRemoteDevice.FindNode("UserOutputSelector").SetCurrentEntry("UserOutput0")