IDS peak 2.15.0 / uEye+ firmware 3.54

Returns the current status of the optic controller.

Values description

•NotConnected: The optic controller is physically not connected.

•NotInitialized: The optic controller is not initialized.

•NotSupported: The optic controller is physically connected but not supported.

•Busy: The optic controller executes a feature access/command.

•Ready (default): The optic controller is ready to use.

•Error: The optic controller encountered an error.

Code example

C++

// Before accessing OpticControllerStatus, make sure OpticControllerSelector is set correctly
// Set OpticControllerSelector to "OpticController0"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("OpticControllerSelector")->SetCurrentEntry("OpticController0");
// Determine the current entry of OpticControllerStatus
std::string value = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("OpticControllerStatus")->CurrentEntry()->SymbolicValue();
// Get a list of all available entries of OpticControllerStatus
auto allEntries = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("OpticControllerStatus")->Entries();
std::vector<std::shared_ptr<peak::core::nodes::EnumerationEntryNode>> availableEntries;
for(const auto & entry : allEntries)
{
  if ((entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotAvailable)
          && (entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotImplemented))
  {
      availableEntries.emplace_back(entry);
  }
}
 

C#

// Before accessing OpticControllerStatus, make sure OpticControllerSelector is set correctly
// Set OpticControllerSelector to "OpticController0"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("OpticControllerSelector").SetCurrentEntry("OpticController0");
// Determine the current entry of OpticControllerStatus
string value = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("OpticControllerStatus").CurrentEntry().SymbolicValue();
// Get a list of all available entries of OpticControllerStatus
allEntries = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("OpticControllerStatus").Entries();
List<string> availableEntries = new List<string>();
for(int i = 0; i < allEntries.Count(); ++i)
{
  if ((allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotAvailable)
          && (allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotImplemented))
  {
      availableEntries.Add(allEntries[i].SymbolicValue());
  }
}
 

Python

# Before accessing OpticControllerStatus, make sure OpticControllerSelector is set correctly
# Set OpticControllerSelector to "OpticController0" (str)
nodeMapRemoteDevice.FindNode("OpticControllerSelector").SetCurrentEntry("OpticController0")
# Determine the current entry of OpticControllerStatus (str)
value = nodeMapRemoteDevice.FindNode("OpticControllerStatus").CurrentEntry().SymbolicValue()
# Get a list of all available entries of OpticControllerStatus
allEntries = nodeMapRemoteDevice.FindNode("OpticControllerStatus").Entries()
availableEntries = []
for entry in allEntries:
  if (entry.AccessStatus() != ids_peak.NodeAccessStatus_NotAvailable
          and entry.AccessStatus() != ids_peak.NodeAccessStatus_NotImplemented):
      availableEntries.append(entry.SymbolicValue())