IDS peak 2.15.0 / uEye+ firmware 3.54

Returns the current electrical format of the selected physical input or output line.

Values description

•TriState: The line is currently in Tri-State mode (not driven).

•OptoCoupled: The line is galvanically isolated using an optocoupler to protect the camera and the PC against surges. Only DC voltages may be applied to the physical lines or pins.

•LVTTL: The line is currently accepting or sending LVTTL level signals.

Code example

C++

// Before accessing LineFormat, make sure LineSelector is set correctly
// Set LineSelector to "Line0"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("LineSelector")->SetCurrentEntry("Line0");
// Determine the current entry of LineFormat
std::string value = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("LineFormat")->CurrentEntry()->SymbolicValue();
// Get a list of all available entries of LineFormat
auto allEntries = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("LineFormat")->Entries();
std::vector<std::shared_ptr<peak::core::nodes::EnumerationEntryNode>> availableEntries;
for(const auto & entry : allEntries)
{
  if ((entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotAvailable)
          && (entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotImplemented))
  {
      availableEntries.emplace_back(entry);
  }
}

C#

// Before accessing LineFormat, make sure LineSelector is set correctly
// Set LineSelector to "Line0"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("LineSelector").SetCurrentEntry("Line0");
// Determine the current entry of LineFormat
string value = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("LineFormat").CurrentEntry().SymbolicValue();
// Get a list of all available entries of LineFormat
allEntries = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("LineFormat").Entries();
List<string> availableEntries = new List<string>();
for(int i = 0; i < allEntries.Count(); ++i)
{
  if ((allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotAvailable)
          && (allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotImplemented))
  {
      availableEntries.Add(allEntries[i].SymbolicValue());
  }
}

Python

# Before accessing LineFormat, make sure LineSelector is set correctly
# Set LineSelector to "Line0" (str)
nodeMapRemoteDevice.FindNode("LineSelector").SetCurrentEntry("Line0")
# Determine the current entry of LineFormat (str)
value = nodeMapRemoteDevice.FindNode("LineFormat").CurrentEntry().SymbolicValue()
# Get a list of all available entries of LineFormat
allEntries = nodeMapRemoteDevice.FindNode("LineFormat").Entries()
availableEntries = []
for entry in allEntries:
  if (entry.AccessStatus() != ids_peak.NodeAccessStatus_NotAvailable
          and entry.AccessStatus() != ids_peak.NodeAccessStatus_NotImplemented):
      availableEntries.append(entry.SymbolicValue())