Specifies the interval (as gap in packets) at which the host sends data to the device to prevent that a firewall blocks the communication on the stream channel. If GevStreamChannelSenderGap is set to 0, no data is sent to the device on behalf of packets.
Name |
GevStreamChannelSenderGap |
Category |
|
Interface |
Integer |
Access |
Read/Write |
Unit |
- |
Visibility |
Expert |
Values |
0 …4294967295 Increment: 100 Default: 0 |
Standard |
IDS |
Availability uEye+ |
|
Availability uEye |
- |
Code Example
C++
// Determine the current GevStreamChannelSenderGap
int64_t value = nodeMapDataStream->FindNode<peak::core::nodes::IntegerNode>("GevStreamChannelSenderGap")->Value();
// Set GevStreamChannelSenderGap to 500
nodeMapDataStream->FindNode<peak::core::nodes::IntegerNode>("GevStreamChannelSenderGap")->SetValue(500);
C#
// Determine the current GevStreamChannelSenderGap
long value = nodeMapDataStream.FindNode<peak.core.nodes.IntegerNode>("GevStreamChannelSenderGap").Value();
// Set GevStreamChannelSenderGap to 500
nodeMapDataStream.FindNode<peak.core.nodes.IntegerNode>("GevStreamChannelSenderGap").SetValue(500);
Python
# Determine the current GevStreamChannelSenderGap (int)
value = nodeMapDataStream.FindNode("GevStreamChannelSenderGap").Value()
# Set GevStreamChannelSenderGap to 500 (int)
nodeMapDataStream.FindNode("GevStreamChannelSenderGap").SetValue(500)
