IDS peak 2.15.0 / uEye+ firmware 3.54

Indicates the command timeout for the connection to the camera. This corresponds to the maximum response time of the camera when a command is sent.

Code example

C++

// Determine the current DeviceLinkCommandTimeout
double value = nodeMapRemoteDevice->FindNode<peak::core::nodes::FloatNode>("DeviceLinkCommandTimeout")->Value();

C#

// Determine the current DeviceLinkCommandTimeout
double value = nodeMapRemoteDevice.FindNode<peak.core.nodes.FloatNode>("DeviceLinkCommandTimeout").Value();

Python

# Determine the current DeviceLinkCommandTimeout (float)
value = nodeMapRemoteDevice.FindNode("DeviceLinkCommandTimeout").Value()