IDS peak 2.15.0 / uEye+ firmware 3.54

Returns the number of control channel retries in response to "busy" acknowledgments since the device was opened.

Code Example

C++

// Determine the current ControlChannelRetryOnBusyCount
int64_t value = nodeMapLocalDevice->FindNode<peak::core::nodes::IntegerNode>("ControlChannelRetryOnBusyCount")->Value();

C#

// Determine the current ControlChannelRetryOnBusyCount
long value = nodeMapLocalDevice.FindNode<peak.core.nodes.IntegerNode>("ControlChannelRetryOnBusyCount").Value();

Python

# Determine the current ControlChannelRetryOnBusyCount (int)
value = nodeMapLocalDevice.FindNode("ControlChannelRetryOnBusyCount").Value()