1. Industrial Filter Mesh and Screen Bonding
Using its high peel strength of 8 N/mm and lap shear strength of 37 N/mm², LOCTITE EA 9466 secures fine stainless steel filter meshes onto filter plates or rotating screens [1.1.5]. The adhesive successfully replaces spot welding which is prone to abrasive erosion and rapid failure. The room-temperature curing formulation ensures no thermal distortion of the fine mesh.
Problem SolvedSpot welds on filtration meshes frequently erode and fail under constant abrasive forces, leading to screen detachment and costly equipment downtime. Using EA 9466 bonds the entire contact area, distributing forces and doubling active service uptime.
Filter mesh bondingStructural bondingPeel resistanceEpoxy adhesive
2. Composite-to-Metal Alignment in Automotive and Aerospace Assembly
During complex assemblies where composite components (GRP, CFRP) must be bonded to metal structures (aluminum, steel), operators need a long window to align parts. With an extended 60-minute working life, this adhesive permits precise positioning of large assemblies before the cure reaction restricts movement.
Problem SolvedFast-curing adhesives cure prematurely when managing complex or multi-part alignments, resulting in misaligned components and scrapped assemblies. The 60-minute pot life allows operators to position and clamp complex assemblies with high precision.
Extended open timeComposite-to-metal bondingPrecision alignmentStructural epoxy
3. Electrical Insulating Structural Assembly for Electronics Enclosures
Utilized as a structural sealant and bond line for electronic control modules and power housings. The adhesive's cured Shore Hardness of D 60 and high dielectric properties enable it to act as an effective electrical insulator while physically holding heavy metal or plastic housing plates together under vibration.
Problem SolvedTraditional mechanical fasteners require drilling, which compromises dust/liquid ingress protection (IP) and can conduct unwanted current. The adhesive provides a completely isolated, high-strength structural bond and seal without conductive metal paths.
Electrical insulationElectronics housingVibration dampingShore Hardness D 60
