1. PLC Input Signal Isolation
Used as an interposing relay between field devices (like sensors or pushbuttons) and a PLC's digital input card. The 24VDC coil is directly compatible with standard control voltage, and its SPST-NO contacts provide a clean, isolated signal to the PLC.
Problem SolvedProtects sensitive PLC input circuitry from voltage spikes, electrical noise, and potential damage from field wiring faults. The slim 10mm width allows for high-density I/O wiring in crowded control cabinets.
Interposing RelayPLC I/OSignal Isolation24VDC ControlHigh-Density I/O
2. Control Panel Status Indication
Drives a 24VDC LED indicator lamp on a control panel. The relay is activated by a machine's control logic, and its 1A contact rating is sufficient to switch the current for a standard industrial indicator.
Problem SolvedProvides a robust and reliable method for visual status feedback. The relay's long mechanical endurance ensures longevity, even with frequent status changes. The bifurcated contacts ensure a reliable connection for low-current LED loads.
Indicator LampControl PanelStatus Feedback24VDC LEDSPST-NO
3. Low-Power Actuator Control
Directly controlling a small 24VDC pneumatic solenoid valve. The relay's 1A contact rating is adequate for switching the low current draw of a miniature solenoid.
Problem SolvedOffers a compact and cost-effective solution for switching low-power loads without the need for a larger, more expensive power relay or contactor. The ultra-slim design saves valuable DIN rail space within a machine's pneumatic control valve bank.
Solenoid ValvePneumatic ControlLow Power Switching24VDC ActuatorCompact Relay
