1. PLC Output Signal Isolation and Amplification
Used as an interposing relay between a PLC's digital output card and a higher-power field device, such as a motor contactor or solenoid valve. The 24VDC coil is directly compatible with standard PLC output voltages.
Problem SolvedProtects the sensitive, low-current PLC output circuitry from electrical noise and high voltage/current from the field device. The relay's 5A contact rating allows the PLC to control loads that exceed its own output current capacity. Its ultra-slim 10mm width allows for high-density I/O wiring in crowded control cabinets.
PLC InterfacingInterposing RelaySignal Isolation24VDC ControlHigh-Density I/O
2. Control Panel Status Indication Switching
Integrated into a machine control panel to switch power to indicator lamps, buzzers, or alarms based on a control signal.
Problem SolvedThe relay's reliable SPST-NO contacts can handle the current required by common panel indicators (up to 5A at 220VAC), while being controlled by a low-power 24VDC signal from a controller or sensor. The long electrical life ensures reliability for frequently changing status signals.
Control PanelStatus IndicationAlarm SwitchingSPST-NOLong Endurance
3. Small DC Motor Actuation in Automated Equipment
Directly driving small 24VDC motors or actuators in applications like conveyor diverters, sorting gates, or automated assembly fixtures.
Problem SolvedProvides a compact and cost-effective method for switching DC motor loads up to 5A. The 15ms max operate/release time is sufficient for many automated tasks. Using this relay simplifies the drive circuit compared to a more complex motor driver, especially for simple on/off control.
DC Motor ControlActuator SwitchingConveyor Automation5A DC LoadElectromechanical Relay
