USD 177.11
USB-based automatic backup configurator for managed switches. Features 1GB SLC NAND flash, IP40 PVC housing, and plug-and-play configuration recovery.
USB-based automatic backup configurator for managed switches. Features 1GB SLC NAND flash, IP40 PVC housing, and plug-and-play configuration recovery.
| Parameter | Value |
|---|---|
| Interface | USB 2.0 Type A |
| Storage Capacity | 1 GB SLC type NAND Flash |
| Input Voltage | 5 VDC (via USB interface) |
| Housing Material | PVC molding |
| IP Rating | IP40 |
| Operating Temperature | 0 to 60°C (32 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Installation | M4 screws (<4 mm) |
| EMC | EN 55032 Class A |
| EMI | CISPR 32, FCC Part 15B Class A |
| ESD (IEC 61000-4-2) | Contact: 4 kV; Air: 8 kV |
| Physical Weight (kg) | 0.05 |
| Dimensions L x W x H (cm) | 9.7 x 3.25 x 1.2 |
Facilitates rapid configuration backup and restoration for managed Ethernet switches in factory automation systems, reducing network downtime during hardware replacements.
Minimizes system downtime during switch failure by allowing instant, PC-free configuration loading.
Utilized by field technicians to extract mass event logs and upgrade firmware on remote networking equipment, leveraging its robust IP40 rating and reliable USB interface.
Simplifies event log retrieval and firmware upgrades in remote, harsh environments without needing a laptop.
Enables plug-and-play firmware loading and parameter synchronization across multiple wireless APs and bridges in SCADA environments efficiently.
Eliminates the need for manual parameter entry across multiple devices, ensuring consistent configuration.
