PEPPERL+FUCHS Diffuse mode sensors are particularly easy to install, since only one device has to be fitted and no reflector is required. These sensors operate primarily at close range, feature optimum switching accuracy, and can reliably detect even very small objects. The sensors with background suppression sense only a specific area in front of the sensor. The sensor ignores any objects that are outside of this area. Sensors with background suppression are also insensitive to interfering objects in the background and are still extremely precise. Sensors with background evaluation are always used in applications with a fixed background in the measuring range with which you can align the sensor.
| General specifications |
| Detection range |
0 … 200 mm |
| Adjustment range |
15 … 200 mm |
| Reference target |
standard white , 200 mm x 200 mm |
| Light source |
LED |
| Light type |
modulated visible red light |
| Polarization filter |
no |
| Diameter of the light spot |
approx. 170 mm at a distance of 200 mm |
| Optical face |
frontal |
| Ambient light limit |
EN 60947-5-2:2007+A1:2012 |
| Functional safety related parameters |
| MTTFd |
860 a |
| Mission Time (TM) |
20 a |
| Diagnostic Coverage (DC) |
0 % |
| Indicators/operating means |
| Operation indicator |
LED green: power on |
| Function indicator |
LED yellow, lights up with receiver lit |
| Control elements |
sensitivity adjustment |
| Control elements |
Light-on/dark-on changeover switch |
| Electrical specifications |
| Operating voltage |
10 … 30 V DC |
| Ripple |
max. 10 % |
| No-load supply current |
< 20 mA |
| Output |
| Switching type |
The switching type of the sensor is adjustable. The default setting is: light-on |
| Signal output |
1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage |
max. 30 V DC |
| Switching current |
max. 100 mA , resistive load |
| Voltage drop |
≤ 1.5 V DC |
| Switching frequency |
1000 Hz |
| Response time |
0.5 ms |
| Conformity |
| Product standard |
EN 60947-5-2 |
| Approvals and certificates |
| UL approval |
cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| CCC approval |
CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature |
-30 … 60 °C (-22 … 140 °F) |
| Storage temperature |
-40 … 70 °C (-40 … 158 °F) |
| Mechanical specifications |
| Housing width |
11 mm |
| Housing height |
31 mm |
| Housing depth |
20 mm |
| Degree of protection |
IP67 |
| Connection |
2 m fixed cable |
| Material |
|
| Housing |
PC (Polycarbonate) |
| Optical face |
PMMA |
| Mass |
approx. 50 g |
| Tightening torque, fastening screws |
0.6 Nm |
| Cable length |
2 m |
Associated Products: ML100-8-W-200-RT/102/115
| Accessories |
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm … 3 mm
|
|
|
|
| Mounting aid for ML100 series, Mounting bracket
|
|
|
|
| Mounting aid for ML100 series, Mounting bracket
|
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm … 3 mm
|
|
|
|
| Mounting aid for ML100 series, Mounting bracket
|
|
|
|
| Mounting aid for ML100 series, Mounting bracket
|
|
|
|
| Mounting aid for ML100 series
|
|
|
|
|
| Mounting aid for ML100 series
|
|
|
|
| Mounting bracket
|
|
