SIMATIC ET 200M – SM 332 Analog Output Module with HART – Siemens Modules

$ 2,289.76

SKU: 6ES7332-8TF01-0AB0
  • For plugging into ET 200M exclusively with IM 153-2 and IM 153-2 FO
  • 8 AO HART
  • Redundancy switching
  • Firmware update
  • HART minor variables

Siemens Analog Output Modules SM 332 Product Specifications:

Article number 6ES7332-8TF01-0AB0
SM332, 8AO, 0/4 – 20MA HART
General information
Product function
● Isochronous mode No
Supply voltage
Load voltage L+
● Rated value (DC) 24 V
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 350 mA
from backplane bus 5 V DC, max. 110 mA
Power loss
Power loss, typ. 6 W
Analog outputs
Number of analog outputs 8
Current output, no-load voltage, max. 24 V
Output ranges, current
● 0 to 20 mA Yes
● -20 mA to +20 mA No
● 4 mA to 20 mA Yes
Connection of actuators
● for current output two-wire connection Yes
Load impedance (in rated range of output)
● with current outputs, max. 750 Ω
● with current outputs, inductive load, max. 10 mH
Destruction limits against externally applied voltages and currents
● Voltages at the outputs towards MANA +60/-0.5 V
Cable length
● shielded, max. 800 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit
● Basic execution time of the module (all channels released) 10 ms; 10 ms in AO mode 50 ms in HART-AO mode
Settling time
● for resistive load 0.1 ms
● for inductive load 0.5 ms
Errors/accuracies
Operational error limit in overall temperature range
● Current, relative to output range, (+/-) 0.2 %
Basic error limit (operational limit at 25 °C)
● Current, relative to output range, (+/-) 0.1 %
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm Yes
Diagnostics indication LED
● Group error SF (red) Yes
Potential separation
Potential separation analog outputs
● between the channels No
● between the channels and backplane bus Yes
● Between the channels and load voltage L+ Yes
Isolation
Isolation tested with 500 V DC
Degree and class of protection
IP degree of protection IP20
connection method / header
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 117 mm
Weights
Weight, approx. 220 g
Weight 0.263 kg
Dimensions 13.2 × 15.3 × 5.1 cm

Related products