SIMATIC ET 200SP – Digital Fail-Safe Input Module – Siemens Digital Fail-Safe Modules

$ 433.40

SKU: 6ES7136-6BA00-0CA0

The fail-safe ET 200SP modules can be used to implement the safety-related application requirements as an integrated part of the overall automation. The safety functions required for fail-safe operation are integrated in the modules. Communication with the fail-safe SIMATIC S7 CPUs is performed by means of PROFIsafe.

Siemens Fail-safe Modules ET 200SP Product Specifications:

Article number 6ES7136-6BA00-0CA0
ET 200SP, El-Mod., F-DI 8x24VDC HF
General information
Product type designation F-DI 8x24VDC HF
Firmware version
● FW update possible
usable BaseUnits BU type A0
Color code for module-specific color identification plate
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V12
● STEP 7 configurable/integrated from version V5.5 SP3 / –
● PROFINET from GSD version/GSD revision V2.31
CiR – Configuration in RUN
Reparameterization possible in RUN
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
power supply according to NEC Class 2 required No
Input current
Current consumption (rated value) 75 mA; without load
Current consumption, max. 21 mA; From the backplane bus
Encoder supply
Number of outputs 8
Short-circuit protection Yes; Electronic (response threshold 0.7 A to 1.8 A)
Output current
● up to 60 °C, max. 0.3 A
24 V encoder supply
● 24 V Yes; min. L+ (-1.5 V)
● Short-circuit protection Yes
● Output current, max. 800 mA; Total current of all encoders
● Output current per channel, max.
● Output current per module, max.
Power
Power available from the backplane bus 70 mW
Power loss
Power loss, typ. 4 W
Address area
Address space per module
● Inputs 6 byte
● Outputs 4 byte
Hardware configuration
Automatic encoding Yes
● Electronic coding element type F Yes
Digital inputs
Number of digital inputs 8
Source/sink input Yes; P-reading
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input voltage
● Rated value (DC) 24 V
● for signal “0” -30 to +5 V
● for signal “1” +15 to +30 V
Input current
● for signal “1”, typ. 3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes
— at “0” to “1”, min. 0.4 ms
— at “0” to “1”, max. 20 ms
— at “1” to “0”, min. 0.4 ms
— at “1” to “0”, max. 20 ms
for technological functions
— parameterizable No
Cable length
● shielded, max. 1 000 m
● unshielded, max. 500 m
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Hardware interrupt No
Diagnostics indication LED
● RUN LED Yes; green LED
● ERROR LED Yes; red LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics Yes; red LED
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics No
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions Yes
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1 PLe
● Category according to ISO 13849-1
● SIL acc. to IEC 61508 SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
— Low demand mode: PFDavg in accordance with SIL3 < 2.00E-05
— High demand/continuous mode: PFH in accordance with SIL3 < 1.00E-09 1/h
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. 0 °C
● horizontal installation, max. 60 °C
● vertical installation, min. 0 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 4 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 49 g
Weight 0.061 kg
Dimensions 6.9 × 7.5 × 3.2 cm

Related products